Address: Building 1, No. 188, Xinghuo Road, Qingcun Town, Fengxian District, Shanghai
The operation of woodworking planer is simple and easy
點擊數：32020-02-02 09:09:55 來源: Shanghai Honggang Machinery Manufacturing Co., Ltd.-Boring machine-GRC spraying machine
新聞摘要:Fast operation, good operation and high sales volume
Woodworking planer: a woodworking machine that uses a rotating or fixed planer to process the plane or shaped surface of wood. According to different process uses, woodworking planer can be divided into plane planer, single side press planer, double side planer, three side planer, four side planer and finish planer.
There are many kinds of planer, according to the different technological use and structure: plane plane, press plane, four side plane, polishing machine, etc.
Plane plane is used to precisely / accurately plane the reference plane of the workpiece blank, and also can process the adjacent plane with the reference plane as the auxiliary reference plane, which can be divided into manual feed and mechanical feed as well as single axis and double axis.
process four faces of workpiece in one feed at the same time. Because of adopting mechanical feed and multi spindle machining, it has high efficiency. The polishing machine is processed by pure planing, which is used for the final finishing of the part surface. The processing
principle is similar to manual planing.
Woodworking planer is used for planing one datum plane or two orthogonal planes of workpiece. The motor drives the planer shaft to rotate at a high speed through the belt, and the workpiece is pressed by hand along the guide plate and pressed against the front workbench to send it to the planer shaft. The front table is lower than the rear table, and the height can be adjusted. The height difference is the thickness of planing layer. Adjust the guide plate to change the processing width and angle of the workpiece. The structure of the joint planer is similar to that of the plane planer, but the machining accuracy is higher
Plane plane is mainly used for the processing of the splicing surface of the plate.
Woodworking planer is used for planing plates and square materials to obtain precise / accurate thickness. It is suitable for the processing of various furniture, vehicles and other wood parts. Its structure is also more complex than plane planing, and there are many types. At
present, single-sided planer is more commonly used.
The planer axis of the single-sided woodworking press makes a rotary cutting movement, and the four rollers above and below the wood make the wood move into the feed movement, and pass through the cutter axis along the workbench. The double-sided woodworking planer is processed by two cutter shafts at the same time. According to the different arrangement of cutter shafts, the opposite or adjacent sides of the workpiece can be planed. The three-sided woodworking planer uses three cutter shafts to plane three surfaces of the workpiece at the same time. The four
side wood planer uses 4-8 cutter shafts to polish four sides of the workpiece at the same time, which has high productivity and is suitable for mass production.